Covering Tyneside, Wearside, County Durham and Northumberland [email protected] 0191 666 0397
Bay-fronted house with a fresh cream sandstone render and white window frames, a decorator at the front door and a scaffold tower at the side

Cracked, Damp or Tired Walls? We Fix Them for Good

Acrylic Rendering Services in Cramlington

Acrylic Render Contractors for Houses, Flats, Shops and Offices

Acrylic Rendering Specialists for a Low Maintenance Finish

  • Free quote from photos
  • Site visit, then quote
  • Homes, flats, shops and offices
Free survey request

Book a free visit

No obligationWritten quote
We only use your details to reply

CoatThin acrylic coatfine grain, over a base coat
MovementFlexible, stretchesless risk of cracking than sand and cement
ColourMixed into the rendersmooth or textured, samples shown first
InsulationGoes on topcommon top layer on external wall insulation

We deliver acrylic rendering services across Cramlington for detached houses, semis, terraces, flats, shops, offices and workshops. TyneRend is an acrylic rendering company that makes rendered walls look sharp and keeps them dry.

The UK has about 28.6 million households, and plenty have tired exterior walls. Flaking paint, stained brick and cracked old render are the usual signs. We fix all three with one clean external render. Send a few photos through our contact form for a free quote.

Parade of three shops with flats above, the upper storey freshly rendered in a pale cream sandstone fine grain finish, two people walking past
Shops, flats and offices
Working in Cramlington

Choosing a Colour and Finish in Cramlington

The Cramlington Neighbourhood Plan has a view on appearance. Its design principles say a restricted palette of materials is preferred, comprising brick and render, red and grey tiles, and slate. On an estate where every house was built at the same time, a new finish works best when it sits with that palette rather than against it.

In Cramlington Village, the rules are tighter. Policy CNP22 supports development in the conservation area where it pays special attention to the historic architecture and townscape in its design, use of materials, detailing and finishes. The plan notes that no character appraisal has been prepared for the area, so there is no written guide to its special character yet. We look closely at the neighbouring buildings before any colour is chosen.

For listed buildings, Northumberland County Council says repainting the exterior usually needs consent if the building has not been painted before, or if the new colour affects its character. Cramlington's listed buildings include Middle Farmhouse and the war memorial in the village square.

Choosing a finish?Tell us your street and the colours you are considering. We will check the area before you order anything.
Open plain white tub of cream ready-mixed render with a steel trowel in it and a hawk board beside it on a scaffold, a plasterer standing behind
Thin coat, ready mixed

What Is Acrylic Render and Is It Any Good?

Acrylic render is a thin coat finish made with acrylic resin. The plastic in the resin is why acrylic stretches instead of snapping. We apply it over a base coat for a smooth, even surface.

Is acrylic render any good? Yes, on the right wall. It is flexible, water resistant and comes in a wide range of colours. It is low maintenance and needs minimal maintenance, and a fresh external render lifts kerb appeal and can add to property value.

It is not perfect. Acrylic is less breathable than lime, so we fix damp first. In shaded spots dirt can show, and a gentle wash sorts it out.

How Long Does Acrylic Render Last?

Done well, acrylic render lasts 20 to 35 years. Preparation matters most, then the system and the weather. A yearly check keeps it a low maintenance, long lasting finish.

Cracked, damp or tired walls?Send your address and a few photos and we will book a site visit.

Which Problems Does Acrylic Render Solve for Your Property?

Cracks, Damp Patches and Tired Walls on Houses and Flats

A 1930s semi with hairline cracks round the windows is a classic case, as is a block of flats with stained walls. As part of our wider rendering services, we repair the surface and fit a new external render. Old pebble dash that looks dated gets a smooth, fresh start.

Acrylic is more flexible than traditional cement render, so the risk of cracking drops. It is fast drying, which means fewer days of scaffolding. It resists water damage, and rain runs off instead of soaking in.

Renovation Projects, New Build Homes and Commercial Properties

Landlords book us for renovation projects where a tired building needs a low maintenance fix. Developers use acrylic on a new build because it goes on fast and gives a modern finish. Our rendering work suits residential and commercial properties alike.

Shops, offices, restaurants and clinics use it too, as a durable finish stays smart without repainting.

Bay-fronted house with grey painted render showing fine hairline cracks and staining, a man looking at the front wall from the pavement
Cracks and tired walls
Two render sample boards leaning on a brick wall, a thick grey cracked sand and cement one beside a smooth sage green acrylic one
Old mix beside new

How Does Acrylic Render Compare With Traditional Renders and Silicone Render?

Traditional renders use a sand cement mix. They are hard, they split as walls move, and most need painting every few years. A traditional sand and cement mix is cheaper on day one but costs more to keep up.

Silicone render is the other modern option. We cover silicone render on its own page, so briefly: silicone render repels water a touch better and has self cleaning properties. Acrylic gives more colour choice at a lower price, and both beat sand cement for upkeep.

Before any render goes onPreparation decides the jobCracks repaired, loose material removed and the surface cleaned before the base coat is fixed.
Damp causeFound before we render
Sound surfaceCleaned and repaired first

What Finishes and Acrylic Render Colours Can You Choose?

A smooth or textured finish both work. Smooth looks clean and flat, while a textured finish hides small flaws. The grain size sets how coarse it feels, and we show samples first.

The colour is mixed into the render, so you get a consistent colour with no brush marks. Dark shades soak up heat, so we check how much sun your wall gets first.

Modern detached house with smooth charcoal grey render, white windows and a pale green front door, a man and dog at the door
Colour mixed in
Plasterer seen from behind finishing a sage green render coat with a plastic float on a gable wall, window masked with tape and plastic
Finishing the coat

How Do We Apply Acrylic Render on Your Walls?

  • We visit, measure the walls and determine the cause of any damp.
  • We repair cracks, remove loose material and clean the surface.
  • We fix the base coat and mesh to the masonry.
  • We apply the acrylic finish in your chosen colour and texture.
  • We clear the site and check the result with you.

Surface preparation is where jobs are won or lost. Acrylic bonds to various substrates, including brick, concrete and blockwork, once the surface is sound. As acrylic rendering specialists, we plan around temperature changes, frost and rain.

Can Acrylic Render Go Over External Wall Insulation?

Yes. Acrylic is a common top layer on external wall insulation, protecting the board that lifts thermal efficiency.

Great Britain had about 30.3 million properties at the end of 2025, and 8.5 million had solid walls. Only 909,000 of those, around 11%, had solid wall insulation. About 29,600 more homes were insulated during 2025, a rise of 3.4%. In England, the median EPC score for existing homes is 68, against 84 for new ones, and semi-detached houses score lowest of the main types at 67.

Ready for a sharp, dry-looking wall?One call books your site visit anywhere across Cramlington.

Why Does the UK Weather Make the Right External Render Matter?

The UK had 1,041.2mm of rain in 2025, which is more than a metre, and that was only 90% of the long term average. A water repellent and weather resistant render keeps it out of your exterior walls. Moisture penetration causes damp, frost damage and flaking. 2025 was also the warmest and sunniest year on record, at 10.09°C on average with 1,648.5 hours of sunshine.

Acrylic copes with building movement because the coat is flexible. In Scotland, about 48% of homes have disrepair linked to weather tightness, structure or further decay. Cornwall had 110% of its normal rain in 2025, while Banffshire had just 69%.

Sloping terraced street in heavy rain with a mix of stone and rendered house fronts, wet road and two people under umbrellas in the distance
Rain on a Cramlington street

How Much Does Acrylic Rendering Cost in Cramlington?

Our rough prices, based on recent projects, sit in the range of £50 to £75 per square metre of render fitted. That covers labour, materials and normal wall preparation. The cost depends on property size, wall condition and finish type.

  • Mid-terrace home, about 60 m²: £3,000 to £4,500
  • Three-bed semi, about 100 m²: £5,000 to £7,500
  • Detached house, about 150 m²: £7,500 to £11,250
  • Scaffolding, extra: £850 to £1,800
  • Removing old render, extra: £20 to £30 per m²

Silicone render usually costs more per square metre than acrylic render. Shops and offices follow the same rate, though access, height and working hours move the final figure. A site inspection lets us give you an accurate quote.

These prices are a rough guide, and the actual cost varies with your wall, access and finish. Please use our contact form and we will give you an accurate quote.

Tradesperson seen from behind shining a torch at a freshly rendered sage green wall to check the finish, white window beside it
Checked before handover

Why Do Property Owners Choose TyneRend as Their Rendering Company?

You get excellent service from the first call to the last check, whether it is a new build or a Victorian terrace. Our team follows the maker's rules for every system we fit, so the finish is long lasting. Each detailed quote lists the area, the system, the finish and the extras.

Our reviews page shows what customers say. We check all works completed against your quote before we hand over.

Not sure acrylic suits your wall?We find the cause of any damp first, then tell you what the wall needs.

Get Your Free Quote From TyneRend for Acrylic Rendering Today

Ready for fresh render on your walls? Use our contact form to send your address and a few photos. As acrylic render contractors, we will book a site visit and send you a free quote from TyneRend.

Man seen from behind taking a phone photo of a cracked, patched and stained grey rendered wall beside a window
Send us a few photos
Acrylic render questions

Asked on almost every survey

How much does acrylic rendering cost in Cramlington?

Acrylic rendering costs roughly £50 to £75 per square metre fitted, covering labour, materials and normal wall preparation. For example, a three-bed semi of about 100 m² comes to around £5,000 to £7,500, with scaffolding extra. This is a rough guide and the actual cost varies with your wall, access and finish, so send photos through our contact form for a free quote.

How long does acrylic render last?

Acrylic render lasts 20 to 35 years when it is fitted well. Preparation matters most, followed by the system used and the weather, and a yearly check helps keep the finish low maintenance.

Is acrylic render any good?

Yes, acrylic render is a good choice on the right wall, as it is flexible, water resistant and available in a wide range of colours. It is less breathable than lime, so we fix any damp first, and a gentle wash sorts out dirt in shaded spots.

What is the difference between acrylic render and silicone render?

The difference between acrylic and silicone render is that silicone repels water a touch better and has self cleaning properties, while acrylic gives more colour choice at a lower price. Silicone render usually costs more per square metre, and both beat sand cement for upkeep.

Can acrylic render go over external wall insulation?

Yes, acrylic render can go over external wall insulation, as it is a common top layer that protects the insulation board and supports thermal efficiency. We follow the maker's rules for every system we fit, so the finish stays long lasting.

How do you apply acrylic render?

We apply acrylic render in stages: repairing and cleaning the wall, fixing a base coat and mesh to the masonry, then applying the acrylic finish in your chosen colour and texture. Surface preparation matters most, and we plan around temperature changes, frost and rain.

Tired walls? Let us take a look.

Acrylic rendering across Cramlington, with a free quote after a site visit.

Free survey
Call Free quote